Inspection Equipment

Product Details:

Granite Surface Plate. A crystalline rock, has a fine grained, nonporous texture. It is crystalline throughout and the composition is hard and compact. 

Additional Information:

• Delivery Time: 4 to 6 weeks

Product Details:

Cast Iron Universal V-Blocks, Cast Iron Plain V-Blocks and Cast Iron Elongated V-Blocksare made from close grained Cast Iron Castings conforming to Grade ...

Product Details:

They are used for clamping and work holding in vertical position and as vertical reference for layout, machining and inspection. They make an ideal fixture for shaping, planning, milling, grinding, horizontal boring and drilling operation.

SALIENT FEATURES :

1. Hand-scrapped Angle Plates slotted and webbed available in Grade-1 and Grade-2 accuracies made generally as per IS-2554-1971.
2. Made from high duty close grained Cast Iron Castings conforming to Grade FG-220 of IS-210.
3. For T-Slotted angle plates, vertical face is provided with horizontally machined T-slots while the base/table face is having cored slots.
4. Angle Plates un-slotted and webbed end type, open end type with cored slots can be made on request at extra cost.
5. Precision Angle Plates having dimensional specification same as per slotted and webbed Angle Plates but accuracy as per IS-6973-1973 can be made on request at extra cost.

Product Details:

Magnetic V-Block has a total 3 Magnetic surfaces. Top and bottom with 90º V-Angle and end surface opposite to switch. Magnetic V-Blocks are offered in two types i.e. soft and hardened.

Additional Information:

• Delivery Time: 4 to 5 weeks

Product Details:

Cast Iron Universal V-Blocks, Cast Iron Plain V-Blocks and Cast Iron Elongated V-Blocks are made from close grained Cast Iron Castings conforming to Grade FG-220 of IS-210, offered duly hand-scrapped finish. Universal V-Blocks and Elongated V-Blocks are generally conforming to IS-4960-68 and Plain V-blocks are generally conforming to IS-2949-1974.

Additional Information:

• Delivery Time: 3 to 4 weeks

Product Details:

Cast Iron Tilting Table is a useful accessory for setting work at an Angle for Milling or other operations. The Table has Machined T-slots along length and can swing up to 45º on either side. For setting purpose a degree scale, reading minimum one degree, is graduated on the end face of cylindrical base itself. This ensures better setting accuracy. The Table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts.

Features:

• Made from close grained plain Cast Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
• Table top and base are flat and parallel within 0.05 mm per 300 mm
• T-slots are parallel to the edge of the table and the cylindrical base within 0.05 mm per 300 mm.
• T-slots parallel to the edges within 0.05 mm per 300 mm

Specification:

Product Details:

Job can be quickly and correctly set at any Angle with the adjustable angle Plates. They are graduated for setting 0 – 90 deg and can be easily adjusted manually and locked in adjusted position by means of two locking nuts. For setting purpose, a degree scale, reading minimum one degree, is graduated on the boss itself. This ensures better setting accuracy. Swivelling face is provided with T-slots Machined from solid. Other face is provided with cored elongated slots for clamping the Angle Plate on the Machine Table.

Product Details:

• Made from close grained Cast Iron Casting conforming to Grade FG- 220 of IS-210. Casting duly stress relieved
• Working faces flat within 0.010 mm per 300 mm and square and parallel within ± 0.04 mm per 300 mm in two extreme positions
• Edges parallel and square within 0.05 mm per 300 mm
• T-slots parallel to the edges within 0.05 mm per 300 mm

Product Details:

Cast Iron Lapping Plates are extensively used for accurate hand-lapping of ferrous and non-ferrous parts to obtain a perfect surface form & flatness:

SALIENT FEATURES :

1. Material specification and constructional features similar to Cast Iron Surface Plates.
2. Offered in Square type, Rectangular type & Round type
3. Top surface provided with 3x3 mm grooves at a pitch of 25-30 mm.
4. Top surface offered duly hand-scrapped/lapped finish
5. M.S. Handles provided for lifting and handling for sizes up to 630 x 630 mm etc. provided upon request at extra cost.
6. Granite Lapping plates are also available.

Product Details:

An economical and versatile fixture to be used along with Inspection Bench Centers for checking PCD of Spur/Helical Gears with reference to the Gear Axis. Provided with a set of 3 suitable locking balls to suit the modules between 1.5 to 7 and corresponding diametrical pitches of Gear Spring Loaded bracket holding locking balls is mounted on a slide, which can be locked in any position to suit varying diameters.

Product Details:

Product Details:

• An economical and versatile fixture to be used along with Inspection Bench Centers for checking PCD of Spur/Helical Gears with reference to the Gear Axis.
• Provided with a set of 3 suitable locking balls to suit the modules between 1.5 to 7 and corresponding diametrical pitches of Gear Spring Loaded bracket holding locking balls is mounted on a slide, which can be locked in any position to suit varying diameters.

 

Product Details:

Cast Iron Straight Edge ---Bow type

Product Details:

It is used on machining centers as ready fixture plates for tooling up. They allow easy, faster and repetitive set up on machine pallet and reduce change over time thereby minimizing loss of operation time. They also help in protecting the surface of machine pallet and can also be used as sub-plates to provide space for work setting.

Salient Features:

• Castings stress relieved to relieve internal stresses.
• Hand scraped surface finish.
• Flatness and parallelity of top and bottom surfaces within 10 microns over 300 mm.
• Squareness between two abutting sides within 10 microns over 300 mm.
• T-slot Type Tables provided with 18H8 T-slots along the length and breadth. These can also be provided with M16 Helicoil steel inserts , if required, at extra cost.
• Provided with counter bored holes for clamping with machine table.
• Standard sizes for Horizontal Machining Centers are shown in the table.
• Other sizes for Vertical Machine Centers, Milling Machines, Boring Machines etc can be offered on request.