Shivani Engineers
Shivani Engineers
Bhosari, Pune, Maharashtra
GST No. 27AAIPT8679C1Z3
TrustSEAL Verified
Call 08037429682 84% Response Rate
SEND EMAIL

Industrial Product

Leading Wholesale Trader of surface plate with central attachment, stenol premium 100 premium grade high temperature conveyor chain oil, punch 4300 s high performance fin press oil for air conditioners and other punchings, granite master square, try l shape and hand held punches from Pune.

Surface Plate With Central Attachment

Surface Plate With Central Attachment
  • Surface Plate With Central Attachment
  • Surface Plate With Central Attachment
  • Surface Plate With Central Attachment
Get Best Quote
Approx. Price: Rs 29,800 / UnitGet Latest Price

Product Details:

Surface FinishPowder Coated
MaterialBlack Granite
BrandMicro Flat Datums
Height of Centre100 mm
ABC200mm

Other Details:

Size of Surface Plate(L x B) Admit Between Center Available approx. (mm)
1000 x 630 550
1000 x 1000 550
1200 x 900 750
1600 x 1000 1150
2000 x 1000 1550
3000 x 1000 2550
Request
Callback
Yes! I am Interested

Stenol Premium 100 Premium Grade High Temperature Conveyor Chain Oil

Stenol Premium 100 Premium Grade High Temperature Conveyor Chain Oil
  • Stenol Premium 100 Premium Grade High Temperature Conveyor Chain Oil
Get Best Quote
Approx. Price: Rs 1,155 / KgGet Latest Price

Product Details:

Usage/ApplicationIndustrial
ColorBlack
BrandMolygraph
Packaging TypeMS Drum
Packaging Size210 kg
Model Name/NumberStenol Premium 100
Temperature(+)250 Degree Celsius

Other Details:-
  • Excellent wear protection with 1000 friction rates
  • Clean chains, no residue formation
  • Adherent resists drop-off and spin-off
Request
Callback
Yes! I am Interested

Punch 4300 S High Performance Fin Press Oil For Air Conditioners And Other Punchings

Punch 4300 S High Performance Fin Press Oil For Air Conditioners And Other Punchings
  • Punch 4300 S High Performance Fin Press Oil For Air Conditioners And Other Punchings
Get Best Quote
Approx. Price: Rs 274 / KgGet Latest Price
Product Brochure

Product Details:

BrandMolygraph
Packaging TypeMS Drum
Packaging Size210 kg
Specific Gravity(15/4 Degree Celsius)0.758
Viscosity @ 40 Degree Celsius1.460 cSt
Flash Point54 Degree Celsius
Pour Point- 35 Degree Celsius
Aniline Point81 Degree Celsius

Benefits :
  • Vaporizes and does not exhibit oil staining during high speed punching with silicon steel plates or electrical thin plates.
  • Ensures that each sheet can be readily separated through the use of a low-boiling point solvents and special additives during the annealing process.
  • Extends life of metal moulds during high-speed stroking, thereby increasing productivity.
  • Contains highly purified base oil with special lubrication improvement agents and abrasion prevention agent.
  • Provides excellent long term chemical stability.
  • Does not react with aluminium or copper.
  • Colourless and odourless.
  • Oil residue cpmpatible with R-407C, R-409,R-410A,R-22,R-134A and other New Age Freons
  • Environment friendly product. Has no harmful effects on humans as the raw materials used are FDA approved.
Request
Callback
Yes! I am Interested

Granite Master Square

Granite Master Square
  • Granite Master Square
Get Best Quote
Approx. Price: Rs 39,800 / UnitGet Latest Price

Product Details:

Thickness25 mm
MaterialCast Iron
Surface FinishPolished
Size500 X 500 X 80 mm
Usage/ApplicationIndustrial
ShapeSquare
Country of OriginMade in India

Salient Features:
  • All faces accurately lapped, opposite sides parallel & adjacent sides perpendicular to each other.
  • Provided with holes for lifting and handling.
  • All edges and corners are liberally rounded off.
  • Finer accuracy can also be achieved on request at extra cost.
Request
Callback
Yes! I am Interested

Try L Shape

Try L Shape
  • Try L Shape
Get Best Quote
Approx. Price: Rs 7,400 / UnitGet Latest Price

Product Details:

ShapeL
MaterialStainless Steel
Size200 x140 x15 mm
Usage/ApplicationIndustrial
Hardness56-58 HRC
Country of OriginMade in India

Other Details:
  • Made generally as per IS-2103-1980.
  • Provided with an undercut at the inner corner of the stock.
  • Offered with flat edge as well as beveled edge (inner and outer edges beveled at 60º angle).
  • Flat edge try square offered in single piece as well as two-piece construction..
  • Larger size can be provided with a lifting arrangement on request at extra cost.
  • Offered with a suitable storage case.
Request
Callback
Yes! I am Interested

Hand Held Punches

Hand Held Punches
  • Hand Held Punches
Get Best Quote
Approx. Price: Rs 6,200 / SetGet Latest Price

Product Details:

Usage/ApplicationIndustrial
MaterialMild Steel
Size4mm
BrandSmart Mark
Corrosion ResistanceYes
Packaging TypeBox

Other Details
  • Suitable for marking material up to 38 Rockwell 'C'
  • For guidance on hardness of material to be marked click here
  • Nickel plating for rust protection
  • Available in two character styles, continuous line or dot formation.
Request
Callback
Yes! I am Interested

Cast Iron Pallet Sub Table

Cast Iron Pallet Sub Table
  • Cast Iron Pallet Sub Table
Get Best Quote
Approx. Price: Rs 1,500 / UnitGet Latest Price

Product Details:

Size400 x 400 x 50 mm
BrandMicro Flat Datums Pvt Ltd
MaterialCast Iron
Usage/ApplicationIndustrial
ShapeSquare
Surface FinishPolished

Salient Features:
  • Castings stress relieved to relieve internal stresses.
  • Hand scraped surface finish.
  • Flatness and parallelity of top and bottom surfaces within 10 microns over 300 mm.
  • Squareness between two abutting sides within 10 microns over 300 mm.
  • T-slot Type Tables provided with 18H8 T-slot along the length and breadth. These can also be provided with M16 Helicoil steel inserts , if required, at extra cost.
  • Provided with counter bore holes for clamping with machine table.
  • Standard sizes for Horizontal Machining Centers are shown in the table.
  • Other sizes for Vertical Machine Center, Milling Machine, Boring Machine etc can be offered on request.
Request
Callback
Yes! I am Interested

Cast Iron Tilting Table

Cast Iron Tilting Table
  • Cast Iron Tilting Table
Get Best Quote
Approx. Price: Rs 61,000 / UnitGet Latest Price

Product Details:

Usage/ApplicationMachine Shops
Size300 x 150 x 110 mm (L x B x H)
BrandMicro Flat Datums
MaterialCast Iron
Surface FinishPowder Coated

Features:

  • Made from close grained plain Cast Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
  • Table top and base are flat and parallel within 0.05 mm per 300 mm
  • T-slots are parallel to the edge of the table and the cylindrical base within 0.05 mm per 300 mm.
  • T-slots parallel to the edges within 0.05 mm per 300 mm

Other Details:


Size in MM Details of T-slots
L x B x H Size of T-slots No. of T-slots Pitch of T-slots
400 x 300 x 200 14 3 100
450 x 225 x 150 14 3 65
500 x 500 x 300 14 4 125
600 x 300 x 200 14 3 100
1000 x 500 x 300 14 4 100
Request
Callback
Yes! I am Interested

500mm Cast Iron Straight Edge

500mm  Cast Iron Straight Edge
  • 500mm  Cast Iron Straight Edge
Get Best Quote
Approx. Price: Rs 8,300 / UnitGet Latest Price

Product Details:

Usage/ApplicationIndustrial
Country of OriginMade in India
Size500mm
MaterialCast Iron

Salient Features:
  • Offered in two types viz. Bow shaped or Camel Back type and I-Section or Parallel type, made generally as per IS-5268- 1991.
  • Bow shaped Straight Edges are provided with pads on their bow for supporting Engineer's Level.
  • Made from close grained Cast Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
  • Offer in hand-scraped finish to various Grades.
  • High spots uniformly distributed. Proportion of bearing area of the working surface not less than 20% for Grade-0 and Grade-1 and not less than 10% for Grade- 2 accuracy Straight Edges.
  • Flatness of side faces: Any 300 mm length flat within 25 microns for Grade-0, Grade-1 and within 50 microns for Grade-2.
  • Squareness of working surfaces and side faces when checked with side face laid on Grade-1 Surface Plate:
  • For Grades-0 and 1 : Within 8 microns per 25 mm 
  • For Grade-2: Within 15 microns per 25 mm
  • Parallelism of side faces:
    For Grades-0 and 1: Not exceeding 30 microns per 300 mm and 60 microns over total length.
    For Grade-2 : Not exceeding 60 microns per 300 mm and 120 microns over any total length.
  • Supplied with rexine cover for protection of working surfaces.
Request
Callback
Yes! I am Interested
X

Explore More Product

View All Product


Reach Us
Rajeev Surendra Thakar (CEO)
Shivani Engineers
Pritam Building, S. No. 232/2/1, Pune-Nasik Road, Opposite Rupee Bank, Bhosari
Pune - 411039, Maharashtra, India


Call Us


Send E-mail